Northern Exposure Exteriors Inc.

Expertise in Home Remodeling and Renovation

Home Up E-Bid Contact Us Gallery

 

 

 

How It Works:  This is an example of how we bid a project.  Every project is different: however, you can see by the bid below we are extremely customer oriented.  Your needs are always met or exceeded.

Thank you for your patience on this information. I have attempted to provide you with as detailed a proposal as possible. Too often contractors leave out various details which are charged back to customers at a later date. As the project manager of this job and an owner of Northern Exposure, it is my responsibility to see that you and I are on the same page with regard to each other’s expectations of the finished project. I have separated out the various aspects of the job in the event you wish to scale back the job or add various details to the job.

 

Build a 14’ Wide, 12’ Deep Screen Porch with an Attached Deck

Northern Exposure Exteriors will build a 14’ wide, 12’ deep screen porch and attached deck. The room will be a screen porch built in a "screen door" style. The deck will be 6’ wide and 12’ deep. It will be framed with treated lumber and finished with Endura deck boards, Endura railings with aluminum spindles. We will have to remove the existing deck. The room and deck will both be built using 2" x 10" joists. The siding on the home, inside the room, will be the same as the rest of the home. The soffit and fascia on the porch will match the home exactly (new aluminum). The shingles will also match the home as close as possible. Northern Exposure Exteriors will be framing gable screens in the peak to allow more light in the porch.

 

Platform and Floor Description

      Install (3) new footing(s) at least 12" wide and 4’ in depth with 18" bell base

      Includes upgrade of platform, catwalk and building a triangular deck.

      Includes use of 10" floor joists.

      Includes installation of double rim joist required by MN UBC.

      Install Endura Board maintenance-free decking on the deck and in the room.

       

 

 

 

 

Wall system

      Includes 2x4" wall construction.

      32" and 36" screen doors used around perimeter of room.

      Left and right wall projection of (12’).

      Front wall width of (14’) with gable roof and gable screens.

      Includes installation of exterior house wrap.

      Includes installation of matching soffit and fascia.

       

Roof system

      Includes Gable style roof system.

      Hand-frame trusses for maximum vault height, gable screen square footage.

      Includes matching roofing shingles (3-tab or Architectural style).

      Includes matching soffit and fascia.

      Includes interior finishing of ceiling with tongue and groove knotty-pine.

      Install new gutters on deck side of new room roof (with one 3" x 4" downspouts).

       

Additional Options included in price.

      Full Cad drawings and drafting fee: (Includes one revision)

      Upgrade from treated decking to Endura Board decking ($1,248 extra included in price)

Electrical Allowance: (Included in Price)

      Installation of ceiling fan, wiring and switch included. (Customer to provide ceiling fan)

      Installation of exterior GFI outlet included.

      Installation of exterior light and switch included.

      All electrical work requires a permit and is performed by a MN licensed electrician in accordance to MN UBC.

      Electrical allowance. $800.00.

TOTAL COST FOR EVERYTHING ABOVE $15,227.00

Additional Options NOT included in price.

      Includes interior finishing of ceiling with tongue and groove knotty pine. $1,068

SIDING OPTION #1

Remove and Replace Siding on Entire Home and Garage with James Hardie Fiber Cement Siding.

This project includes removal and disposal of all siding on home and garage and installation of house wrap. The siding would have a 7" lap profile. We will be putting on 5.5" double sided corner trim pieces around the entire home. Northern Exposure Exteriors will also install James Hardie shakes in the large front gables (3). They will be in the staggered edge look. We will separate the shakes from the siding with a 5.5" band board all three gables. The siding will be completely caulked and ready to paint when we finish. All of the siding and corners will be primed, but not painted, except the shakes, which come un-primed. The siding carries a 50-year transferable warranty. This price is for shakes in the front gables and 7" lap siding on the rest of the home. $14,939.00 +permit to be billed after cost is incurred

Prep and Apply (2) coats of Sherwin Williams Superpaint $2,800.00

 

   

 

SIDING OPTION #2

Amcraft 16’ Thunderbay premium vinyl siding and Vinyl Shakes on (3) Front Gables

This includes removal and disposal of all siding on home and porch and installation of house wrap. Northern Exposure Exteriors will install vinyl siding on all sides of the home and garage. With this quote, we are including all of the accessories that go along with the siding, i.e. light blocks, dryer vents, water spigot cases and corner posts to match. The vinyl siding that we will install will be a 16’ long panel, with a Ύ" deep profile in the 4.5" profile. The siding will have a thickness of .046", a double rolled nailing hem, and a 240 m.p.h. wind rating. It will have a (4) hunter unit fade warranty that will pay both material and labor if the siding fades beyond that benchmark. The vinyl siding will also carry a Double Lifetime Limited Warranty that is non-prorated and transferable. We will also be installing Nailite Vinyl Shakes in all gables on the front of the home and garage. This will be in the "chunky" looking Hand-Split shake. Siding color: To Be Determined. Siding profile: To Be Determined. Shake color: To Be Determined. $11,874.00 * PERMIT TO BE BILLED UPON COMPLETION FOR ACTUAL COST INCURRED

 

Install Custom Cut Foam Behind Siding

Northern Exposure Exteriors will install custom cut foam behind the siding during the installation process to give the home additional insulation. This will be installed behind all of the vinyl siding. The approximate R-value increase would be around 4. It will also give the home some additional impact resistance to dings and dents. This would also include foam inserts into the corner posts. $2,218.00

* PERMIT TO BE BILLED UPON COMPLETION FOR ACTUAL COST INCURRED

 

 

Cover Eaves and Overhangs with Aluminum Soffit and Fascia

We will install aluminum soffit and custom-bent aluminum fascia on all eaves and overhangs on the home. No work will be done on the front porch soffit. This will all be in a color to be determined by you. $3,780.00

Cover Large Front Porch Soffit w/ Aluminum

We will install aluminum soffit and custom-bent aluminum fascia on the front porch soffit. This will all be in a color to be determined by you. $727.00

This price includes blue prints and dumpsters, but does not include the permit, which will be billed after the cost is incurred. Please let me know if you would like me to price any other options, or if you have any questions. Thanks for your time.

 

Jason Parks

Owner

Northern Exposure Exteriors, Inc

jparks@northernexposureexteriors.com

O: 763-783-1121

C: 763-458-8558

Home ] Up ] [Site Map}

763-783-1121    or    sales@northernexposureexteriors.com

Copyright © 2007 Northern Exposure Exteriors Inc.      Web info send to stumplayer@northernexposureexteriors.com